Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

Release the bonnet using the designated lever and lift it to secure it with the prop rod at the top of the bonnet. This allows you to access the rear of each headlight, where you can remove the protective rear cover to carry out the necessary replacement.

Disconnect the connector attached to each bulb to extract it and then install the new bulb in the correct position. If necessary, repeat the same steps on the headlight on the other side, then retrace your steps for reassembly.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Removing the Front Headlamp of a Fiat Panda
Removing the Front Headlamp of a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) In this video, you will see how to remove the front headlamp of the classic Fiat Panda. First, open the bonnet and remove the protective cover of the…
Dismantling the Front Headlight on a Fiat Panda 169
Dismantling the Front Headlight on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will learn how to remove the front headlight of a Fiat Panda 169 by following these simple instructions. First, remove the fastening screw…
How to Replace the Dipped Beam Bulbs in a Fiat Panda
How to Replace the Dipped Beam Bulbs in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This short video will show you how to remove the old H4 bulbs for the dipped beams in your Fiat Panda and replace them with new bulbs. This is a simp…

Other guides you may be interested in

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos