Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the thermostat of the Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Thermostat

Today's instructions will show us the process of disassembling and replacing the thermostat of the Ford Fiesta. First, we disconnect the cooling liquid hose from the radiator, letting the fluid drain into a container for about ten minutes; then we open the hood and remove the left front headlight, as shown in the video. At this point, we will find the two pipes connected to the thermostat below, which we will remove; then we unscrew the thermostat screws to remove it and replace it with the new one, applying the reverse process!

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Thermostat
Instructions for Replacing the Thermostat
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) The heater valve regulates the flow of heat into the cabin. Since the cooling system must be drained when replacing the heater valve, the author of t…
Where is the coolant temperature sensor located in the Ford Fiesta?
Where is the coolant temperature sensor located in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video we can see where the coolant temperature sensor is located in the Ford Fiesta, useful in case we need to replace it, an extremely simpl…
How to Replace the Thermostat on a Ford Fiesta
How to Replace the Thermostat on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, open the front bonnet of your Ford Fiesta. Begin by draining the cooling system by undoing the relevant drain screw. Next, remove th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos