Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Immobiliser Light on the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Warning light – error code

See other generations:
Video tutorial

The immobiliser light on the Ford Focus MK2 illuminates when you need to check that the relevant fuse and battery connections are not faulty. First, check the battery condition using a tester and inspect the terminals.

Next, check the fuse box to ensure the fuses are in good condition. If both are fine, take the vehicle to a garage for a diagnostic check to resolve the issue.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Ford Focus
How to reset the service light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will explain how to independently reset the service light, related to the oil change of the Ford Focus produced from 2012 to 2018. To reset …
How to Reset the Immobiliser Lock on a Ford Focus
How to Reset the Immobiliser Lock on a Ford Focus
Ford Focus (2011-2018 / MK 3) If the message "immobiliser active" appears when starting the engine and you cannot start the car, first perform a diagnostic check of the system to …
How to reset the oil light on the Ford Focus
How to reset the oil light on the Ford Focus
Ford Focus (2011-2018 / MK 3) The oil light comes on in a 2013 Ford Focus when it is necessary to top up or replace the engine oil in the tank. After performing this operation, it…

    Frequently Asked Questions

    • Focus 2004-2011 - What does the airbag warning light on Ford Focus indicate? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos