Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the crankshaft position sensor of the Ford Transit Connect

Model: Ford Transit MK 7 - Years 2006-2014
Part: Crankshaft position sensor

Today's main steps will show us how to disassemble and replace the crankshaft position sensor of the Ford Transit Connect. First, we lift the vehicle and start removing the lower engine partition; then we locate the crankshaft position sensor, located next to the pulley, as shown in the video. At this point, we disconnect the electrical connector and unscrew the fixing screws to remove it and replace it with the new one; we install the new crankshaft position sensor, making the connection, following the video tutorial until the end!

Posted on 27 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to check the battery status of the Ford Transit Connect
How to check the battery status of the Ford Transit Connect
Ford Transit (2014-2024 / MK 8) In this guide, we will see the instructions that will allow us to check the battery charge status of the Ford Transit Connect. First of all, we open …
Removing the Armrest of the Ford Transit Connect
Removing the Armrest of the Ford Transit Connect
Ford Transit (2014-2024 / MK 8) In this brief and simple guide, discover how to remove and replace the armrest of the front seats in the Ford Transit Connect. First, get inside the …
How is the battery replacement of the Ford Transit Connect key done?
How is the battery replacement of the Ford Transit Connect key done?
Ford Transit (2014-2024 / MK 8) Here's how to replace the battery of the key, and therefore the remote control, of the Ford Transit Connect. It is obvious to say that you realize th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos