Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter in the Ford Transit Connect van?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Diesel fuel filter

In this tutorial we can see how to replace the fuel filter in the Ford Transit Connect van, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then open the hood and remove the plastic cover. Next, locate the filter in question, disconnect both the sensor connector and both tubes, and unscrew all the indicated fixing bolts. At this point, we can remove the filter from the housing, separate it from the top cap, and install the replacement by simply following the reverse procedure.

Posted on 29 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to check the level of AdBlue liquid in the Ford Transit Connect van?
How to check the level of AdBlue liquid in the Ford Transit Connect van?
Ford Transit (2014-2024 / MK 8) In this tutorial we can see how to check the level of AdBlue liquid in the Ford Transit Connect van, an extremely simple and quick operation. First o…
How to Replace the Battery in a Ford Transit Connect Van?
How to Replace the Battery in a Ford Transit Connect Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, you will see how to replace the battery in a Ford Transit Connect van, a very simple operation. First, ensure that the key is not i…
Where is the battery located in the Ford Transit Connect van?
Where is the battery located in the Ford Transit Connect van?
Ford Transit (2014-2024 / MK 8) In this video we can see where the battery is located in the Ford Transit Connect van and how to proceed in case we need to replace it, a very simple…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos