Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the Ford Focus dashboard bulb

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Dashboard
Operation: How to replace the Ford Focus dashboard bulb

To carry out this operation it is advisable to disconnect the cables from the battery in order to work in complete safety and to be able to protect any more delicate circuits, then you will have to remove the panel located under the steering column, in this way you can also extract the upper panel that surrounds the dashboard display, so in this way you can also remove the screws that secure the display with the speedometer, by extracting it you can unhook the plugs from the back and in this way you can make the necessary replacements to your dashboard, and that's it!


Posted on 7 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the Ford Focus dashboard fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos