Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the inertia switch located in the Ford Taurus?

Model: Ford Taurus MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the inertia switch is located in the Ford Taurus and how to reset it if needed. This operation should be performed after an accident, but only after a thorough inspection of the vehicle.

As shown, the switch is located inside the trunk, specifically within the cover of the right side wall. To reset it, simply open the trunk, remove the cover, and firmly press the red top element.

At this point, you can start the engine.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Where to Find the Cabin Fuse Box of the 2007 Ford Taurus
Where to Find the Cabin Fuse Box of the 2007 Ford Taurus
Ford Taurus (2000-2007 / MK 4) In this mini guide, you will discover where the cabin fuse box is located in your 2007 Ford Taurus. By following the instructions provided, you will …
How to reset the service light on the Ford Taurus
How to reset the service light on the Ford Taurus
Ford Taurus (2016-2023 / MK 7) If you own a Ford Taurus latest model and want to learn how to properly perform a manual reset of the service light, then all you have to do is follo…
What is the fuse diagram for the Ford Taurus?
What is the fuse diagram for the Ford Taurus?
Ford Taurus (2008-2010 / MK 5) In this video, we can see where the fuse boxes of the Ford Taurus are located and what their respective diagrams are, useful in case we need to check…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos