Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the rear light of the Ford S-Max Mk2.

Model: Ford S Max MK 2 - Years 2016-2024
Part: Tail light

The guide shows how to disassemble the rear lights of the Ford S-Max Mk2 to replace the bulbs. From the trunk, remove the plastic cover of the light screws and remove them with a Torx T25 screwdriver. At this point, it is possible to pull the entire light assembly towards the back of the vehicle to unlock the front fixing pin; be careful not to pull too hard to avoid damaging the electrical connectors. Disconnect the power cable before completely removing the light. Reassembly is done in a similar manner.

Posted on 27 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the mirror arrow of the Ford S Max
How to replace the mirror arrow of the Ford S Max
Ford S Max (2016-2024 / MK 2) If the bulb of the arrow indicator placed on one of the external rearview mirrors of your second-generation Ford S Max has suddenly stopped working, …
How to Replace the Key Battery on Ford S-Max
Ford S Max (2016-2024 / MK 2) This short video tutorial demonstrates how to replace the battery (CR2450) in the remote key for a second-generation Ford S-Max. This guide is also a…
How do you replace the battery of the Ford S-Max remote control?
How do you replace the battery of the Ford S-Max remote control?
Ford S Max (2016-2024 / MK 2) To replace the battery of the Ford S-Max remote control, you need to use an object to pry in the back of the device, so that you can completely detac…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos