Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the injector of the Ford Transit 2.2 TDCi MK7

Model: Ford Transit MK 7 - Years 2006-2014
Part: Fuel injectors

In this video, we will see how to remove the injector of a Ford Transit 2.2 TDCi MK7: first, we will need to remove the injector pipes using a 17 mm wrench, loosening them and then removing them by hand: we will first loosen the nut that goes to the rail, and then the one that goes to the injector: fuel may come out, so it is advisable to place a cloth to absorb the leakage. We then remove the connector, and the fixing clip that holds the return pipe, with a flat head screwdriver; we now remove the return pipe (to which, when reassembling, we will need to change the gasket). When removing the injectors, we will also need to change all the gaskets, which are part of a kit. Now we need to remove the injector bracket, and then the injector itself, using a lever and lifting it slowly.

Posted on 1 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Injector on the Ford Transit Elliot 40 Maxi TDCi 2005
How to Replace the Injector on the Ford Transit Elliot 40 Maxi TDCi 2005
Ford Transit (2000-2006 / MK 6) This guide outlines how to remove and potentially replace the injectors on the Ford Transit, specifically the 2005 Elliot 40 Maxi TDCi model, which i…
How to Remove the Injectors on the Ford Transit MK8 2.2 TDCI
How to Remove the Injectors on the Ford Transit MK8 2.2 TDCI
Ford Transit (2014-2024 / MK 8) In this video tutorial, you will see how to remove and replace the diesel injectors on the eighth series Ford Transit with a 2.2 TDCI engine in simpl…
How to Replace the Timing Chain on the Ford Transit 2.2 TDCi
How to Replace the Timing Chain on the Ford Transit 2.2 TDCi
Ford Transit (2006-2014 / MK 7) Below we will discover the useful information for disassembling and replacing the timing chain on the Ford Transit 2.2 TDCi. To access the timing cha…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos