Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injector on the Ford Transit Elliot 40 Maxi TDCi 2005

Model: Ford Transit MK 6 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel injectors

See other generations:
Video tutorial

This guide outlines how to remove and potentially replace the injectors on the Ford Transit, specifically the 2005 Elliot 40 Maxi TDCi model, which is Turbo-Diesel. The injector to be replaced is the one closest to the radiators and the bolt maintaining the diesel pressure.

Follow these steps: 1. Open the bonnet; 2. Clean the area with a compressor and remove any impurities; 3. Unscrew the high-pressure diesel bolt with a 17mm spanner; 4. Disconnect the diesel return pipe and its electrical connector; 5. Use a 21mm socket to remove the injector and, with the same tool halfway down, insert the new injector to position it correctly.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to remove the injector of the Ford Transit 2.2 TDCi MK7
How to remove the injector of the Ford Transit 2.2 TDCi MK7
Ford Transit (2006-2014 / MK 7) In this video, we will see how to remove the injector of a Ford Transit 2.2 TDCi MK7: first, we will need to remove the injector pipes using a 17 mm …
How to Remove the Injectors on the Ford Transit MK8 2.2 TDCI
How to Remove the Injectors on the Ford Transit MK8 2.2 TDCI
Ford Transit (2014-2024 / MK 8) In this video tutorial, you will see how to remove and replace the diesel injectors on the eighth series Ford Transit with a 2.2 TDCI engine in simpl…
How to Replace the Timing Chain on the Ford Transit 2.2 TDCi
How to Replace the Timing Chain on the Ford Transit 2.2 TDCi
Ford Transit (2006-2014 / MK 7) Below we will discover the useful information for disassembling and replacing the timing chain on the Ford Transit 2.2 TDCi. To access the timing cha…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos