Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light in the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Warning light – error code

In this tutorial we can see how to reset the tire pressure warning light in the Ford Kuga, an extremely simple and quick operation, to be carried out only after restoring the correct pressure of each tire following the instructions in the manual. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, reach the general menu using the directional buttons on the steering wheel, enter "Settings", "Driver Assist", "Tyre monitor", and hold down the "OK" button to reset. Finally, complete the procedure by restarting the instrument panel.

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Ford Kuga?
How to reset the tire pressure light on the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) In this tutorial we can see how to reset the tire pressure light in the Ford Kuga, an extremely simple and quick operation, to be done only once the …
How to reset the tire pressure light on the Ford Kuga?
How to reset the tire pressure light on the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) .. In this tutorial we can see how to reset the tire pressure warning light in the Ford Kuga, an extremely simple and quick operation,.. …
How to reset the BMS on the Ford Kuga
How to reset the BMS on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today we will see step by step instructions on how to reset the Battery Monitoring System (BMS) of the Ford Kuga. In the initial part of the video, t…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos