Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part:

The activation of the tire pressure warning indicates a loss of pressure or a possible puncture on one or more tires; let's see how to reset the TPMS light on the Ford Kuga. Before resetting the warning, it is necessary that all four tires are at the correct pressure; then we get into the car and turn on the instrument panel, as shown in the video. At this point, we enter the settings of the onboard computer using the controls on the steering wheel, until we reach the tire pressure option; then we press the "ok" button to confirm the TPMS warning reset!

Posted on 12 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Ford Kuga?
How do you reset the tire pressure warning light on the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) It will be possible to reset the tire pressure warning light of the Ford Kuga by inflating the tires to the recommended pressure value: this value wi…
How to reset the tire pressure sensor on the 2021 Ford Kuga
How to reset the tire pressure sensor on the 2021 Ford Kuga
Ford Kuga (2020-2026 / MK 3) If the tire pressure warning light on the display of your 2021 Ford Kuga continues to illuminate even in the absence of a puncture or actual pressure…
How do you reset the tire pressure warning light in the Ford Kuga?
How do you reset the tire pressure warning light in the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) A deflated or punctured tire, or a broken tire sensor, will cause the warning light in question to come on. What to do? First, it is necessary to rep…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to reset the tire warning light in Ford Kuga? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos