Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part:

In this tutorial we can see how to reset the tire pressure warning light in the Ford Kuga, an extremely simple and quick operation, to be done only after restoring the correct pressure of each tire following the instructions in the manual. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, we reach the general menu on the main display, enter "Settings", "Driver assist", "Tyre monitor", and reset by holding down the "OK" button. Finally, we complete the procedure by restarting the vehicle.

Posted on 14 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Ford Kuga?
How do you reset the tire pressure light on the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) In order to reset the tire pressure warning light on the Ford Kuga, you need to inflate the tires until they reach the optimal pressure value: this v…
How to reset the tire pressure sensor on the 2021 Ford Kuga
How to reset the tire pressure sensor on the 2021 Ford Kuga
Ford Kuga (2020-2026 / MK 3) If the tire pressure warning light on the display of your 2021 Ford Kuga continues to illuminate even in the absence of a puncture or actual pressure…
How do you reset the tire pressure warning light on the Ford Kuga?
How do you reset the tire pressure warning light on the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) It will be possible to reset the tire pressure warning light of the Ford Kuga by inflating the tires to the recommended pressure value: this value wi…

    Frequently Asked Questions

    • Kuga 2012-2019 - How to reset the tire warning light in Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos