Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Spark plugs

Today we will explain how to replace the spark plugs of the Ford Focus. First, open the front hood and cover the bumper bodywork with a cloth to avoid scratching it during the replacement procedure. Then, remove the spark plug caps from the spark plug holes, being careful not to damage the filters. Clean the holes using an air compressor. Unscrew the spark plugs using a spark plug socket n°16 and a ratchet wrench. Remove the spark plugs, remembering their positions. Apply high-temperature anti-seize lubricant to the threads of the new spark plugs and proceed to insert them into the holes. Screw the spark plugs with the n°16 socket and tighten to a torque of 15 Nm. Replace the caps and run the engine for a few minutes to ensure that the component is functioning correctly.

Posted on 14 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Ford Focus
How to Replace the Spark Plugs on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the bonnet of your Ford Focus. Begin by pulling the spark plug leads upwards to remove them. Once you have removed all the…
How to Remove and Replace Spark Plugs on a Ford Focus
How to Remove and Replace Spark Plugs on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This video demonstrates how to remove and replace the spark plugs on a Ford Focus. Open the engine bay, lift the front bonnet, and secure it with the…
How to replace the spark plugs on the Ford Focus 2
How to replace the spark plugs on the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will explain how to replace the spark plugs of the Ford Focus 2 in a simple and fast way. To perform this operation, lift the grill logo, in…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos