Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to enter programming mode for a smart key on a Ford C-Max MK2

Model: Ford C Max MK 2 - Years 2010-2019
Part: Onboard computer

In this video, we see how to enter programming mode for a Smart Key on a Ford C-Max MK2: in this case, it is a 2011 model. It is highly likely that this method can be used on all vehicles that have a start button instead of a key, on all Ford models. In fact, we know that to enter this mode on models with a key, it is necessary to move the key from the zero position to one four times in six seconds, which is not possible with vehicles that have a push-button start. But the system is the same. We must press the button four times in six seconds, and the car will signal with a sound that we have entered programming mode. Within ten seconds, we will press the button we want to program, and it's done!

Posted on 18 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to program the key fob remote for the Ford C-Max
How to program the key fob remote for the Ford C-Max
Ford C Max (2010-2019 / MK 2) In this guide we will see the instructions that will allow us to program the remote control of the Ford C-Max key. First of all, we take our remote c…
How to reset the tire pressure sensor on a Ford C-MAX
How to reset the tire pressure sensor on a Ford C-MAX
Ford C Max (2010-2019 / MK 2) Today we can see how to reset the tire pressure sensors on a second generation Ford C-MAX. To perform this procedure we will need a specific reset to…
How to Reset the TPMS Light on the Ford C Max 2
How to Reset the TPMS Light on the Ford C Max 2
Ford C Max (2010-2019 / MK 2) .. In this new mini guide dedicated to your Ford C Max Mk2 (2010-2019), you will learn the various steps necessary to manually reset the TPMS light on the.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos