Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on a Ford C-Max. Turn on the ignition without starting the engine, just the ignition on. Press the brake pedal and the accelerator at the same time, holding them both for 15/20 seconds, or until the message "service reset in progress" appears.

Subsequently, the message "reset completed" will appear.

Only now can you release the pedals. The service light has been successfully reset.

This procedure is valid for all C-Max models up to around 2018. If the message indicating that the reset is in progress does not appear, then you need to go to the menu: settings/vehicle settings/oil status and confirm with "ok".


Posted on 13 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Ford C-Max?
How to Reset the Service Light on a Ford C-Max?
Ford C Max (2010-2019 / MK 2) To reset the Service light on a Ford C-Max, turn on the instrument panel by turning the key in the ignition switch: once it is on, press the brake an…
How to reset the Service light on the Ford C-Max?
How to reset the Service light on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To reset the Service light on the Ford C-Max, press and hold the brake and accelerator pedals simultaneously while the instrument cluster is off. Whi…
How to Reset the Service Light on a Ford C Max
How to Reset the Service Light on a Ford C Max
Ford C Max (2010-2019 / MK 2) In this article, you will learn how to reset the maintenance light on a Ford C Max if the light remains on even after the service has been performed.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos