Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage compartment of a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Through this very useful video tutorial, we can see the entire step-by-step procedure for disassembling the glove compartment on the passenger side of a Ford Focus, third series model in production from 2011 to 2018. Therefore, to remove the glove compartment, we must unscrew the five screws holding it in place, two screws can be found on the top of the glove compartment once opened, two more screws are located underneath the glove compartment, and the last one is located behind the plastic panel on the side of the dashboard, which, as shown in the video, needs to be removed.

Once all the screws are unscrewed, we can open the glove compartment and then remove it.


Posted on 3 April 2025 by ScegliAuto


Related tutorials

How to Remove the Clutch Pedal from a Ford Focus
How to Remove the Clutch Pedal from a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by entering the cabin, specifically the driver's seat. Proceed to remove the carpet in the lower area of the pedal box. Next, disconnect the cl…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
How to Remove the Centre Console from a Ford Focus
How to Remove the Centre Console from a Ford Focus
Ford Focus (2011-2018 / MK 3) In this video, we will see how to remove the centre console from a Ford Focus. Use a plastic lever to pry off the cover located at the bottom of the …

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos