Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Ford Fiesta key remote control

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Key

See other generations:
Video tutorial

These short and simple instructions will allow us to disassemble and replace the battery of the Ford Fiesta key remote. First, we take our remote and start by separating the physical key from the controls; then we pry open the sides to open the shells into two parts, thus accessing the electronic board and the battery, as shown in the video.

At this point, we remove the battery and replace it with the new one, of the correct type (in this case a 3V CR 2932); we insert it in the correct direction and reassemble the remote shell and finally the key!


Posted on 26 May 2025 by ScegliAuto


Related tutorials

Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To change the battery of the remote control for a Ford Fiesta, follow a few simple steps. Press the side buttons on the casing: the mechanical key wi…
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's video, we will see how to replace the dead battery in a Ford Fiesta remote. Start by removing the plastic cover on the back. Now extract t…
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The battery in the Ford Fiesta remote control can be replaced by anyone, even those with little experience. The only tool needed to successfully comp…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the orange light with a wrench mean on the Ford Fiesta? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos