Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Ford Mondeo 4 located?

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

Thanks to the steps described in this new guide, you will be able to find the OBD port inside the cabin of your Ford Mondeo Mk4 on your own. Firstly, get into the car and leave the driver's side door open. Make sure your Ford Mondeo is completely turned off, then proceed to open the small compartment located on the left side of the dashboard.

Once you have done this, locate the OBD port you were looking for and connect a diagnostic tool to it if you need to analyze any errors detected by the car's ECU.


Posted on 22 June 2025 by ScegliAuto


Related tutorials

What is the fuse diagram for the Ford Mondeo?
What is the fuse diagram for the Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) In this video, you can see where the fuse boxes are located in the Ford Mondeo and their respective diagrams, useful if you need to check the fuses o…
Where is the Fuel Temperature Sensor on the Ford Mondeo?
Where is the Fuel Temperature Sensor on the Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) This video shows where the fuel temperature sensor is located on the Ford Mondeo and how to proceed if you need to replace it. As shown, the sensor i…
How to Disable the Immobiliser in a Ford Mondeo?
How to Disable the Immobiliser in a Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) To disable the immobiliser in a Ford Mondeo, connect a diagnostic tool to the vehicle's OBD port: this is located in the dashboard area immediately b…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos