Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Temperature Sensor on the Ford Mondeo?

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

This video shows where the fuel temperature sensor is located on the Ford Mondeo and how to proceed if you need to replace it. As shown, the sensor is positioned at the front of the engine, just below the intake manifold. To remove it, first disconnect the power connector, then unclip the two side fastening clips.

Once extracted from the housing, you can insert the replacement and reconnect the connector. Ensure you work with the engine completely cold to avoid burns.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

Where is the Temperature Sensor on the Ford Mondeo and How to Replace It?
Where is the Temperature Sensor on the Ford Mondeo and How to Replace It?
Ford Mondeo / Fusion (2014-2021 / MK 4) The coolant temperature sensor on the Ford Mondeo is located under the bonnet, specifically between the radiator and the water reservoir. If it malfu…
Removal and Replacement of A/C Temperature Sensor
Removal and Replacement of A/C Temperature Sensor
Ford Mondeo / Fusion (2000-2007 / MK 2) This video shows how to remove and replace the air conditioning temperature sensor on your car. If you have experienced issues with your air conditio…
Temperature Sensor Replacement
Temperature Sensor Replacement
Ford Mondeo / Fusion (2000-2007 / MK 2) The temperature sensor resembles a glow plug with a cable and connector attached. Open the front bonnet and remove the plastic cover located on top o…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos