Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of A/C Temperature Sensor

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Air conditioning

See other generations:
Video tutorial

This video shows how to remove and replace the air conditioning temperature sensor on your car. If you have experienced issues with your air conditioning, you can check for errors by connecting the car to a diagnostic tool. In this case, an error appears with the air conditioning temperature sensor; to replace it, you will need to disassemble the entire centre console where the gear lever is located and disconnect several connections.

Finally, you will have to disconnect the entire dashboard to access and replace the temperature sensor located at the beginning of the central air duct.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Temperature Sensor Replacement
Temperature Sensor Replacement
Ford Mondeo / Fusion (2000-2007 / MK 2) The temperature sensor resembles a glow plug with a cable and connector attached. Open the front bonnet and remove the plastic cover located on top o…
Evaporator Temperature Sensor Replacement
Evaporator Temperature Sensor Replacement
Ford Mondeo / Fusion (2000-2007 / MK 2) This video shows the complicated procedure for replacing the evaporator temperature sensor on a Ford Mondeo. The replacement of the individual part i…
Where is the Fuel Temperature Sensor on the Ford Mondeo?
Where is the Fuel Temperature Sensor on the Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) This video shows where the fuel temperature sensor is located on the Ford Mondeo and how to proceed if you need to replace it. As shown, the sensor i…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos