Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo / Fusion
    4. : Temperature sensor replacement

Ford Mondeo / Fusion - Video tutorial

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Coolant temperature sensor
Operation: Temperature sensor replacement

The temperature sensor has the shape of a glow plug to which a cable is connected with its socket. Open the front hood and remove the plastic cover placed on top of the engine; then remove the cover of the timing belt as the sensor is located just behind the camshaft pulley: it is accessed through one of the slots on the body of the pulley itself. Then unscrew the sensor and disconnect the socket of the relative wiring. Then fit the new sensor, connect the socket taking care to position the cable accurately and refit the timing and engine cover


Posted on 10 July 2023 by ScegliAuto



Removing and replacing the A / C temperature sensor
Ford Mondeo / Fusion (2000-2007 / MK 2) This video shows us how to remove and replace the air conditioning temperature sensor on our car. If we have encountered problems with the operation
Where is the fuel temperature sensor located in the Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) In this video, we can see where the fuel temperature sensor is located in the Ford Mondeo and how to proceed in case we need to replace it. As shown,
Replacing the evaporator temperature sensor
Ford Mondeo / Fusion (2000-2007 / MK 2) This video shows the complicated process of replacing the evaporator temperature sensor on a Ford Mondeo. The replacement of the single piece itself

    Frequently Asked Questions

    • Mondeo 2000-2007 - Where is the Ford Mondeo Mk2 engine water temperature sensor located? Read Answer
    • Mondeo 1993-2000 - Where is the water temperature bulb of the Ford Mondeo 2.0dci year 2002? Read Answer

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos