|
Do it yourself
| |||
| ||||
Replacing the Timing Belt on a Ford Mondeo MK5
Model: Ford Mondeo / Fusion
MK 5
- Years 2022-2026
Replacing the timing belt on a Ford Mondeo MK5 2.0 diesel requires time and attention. Start by removing the left front wheel and the wheel arch lining, taking out the 10 mm bolts and clips. Disconnect the battery and the fuel filter support. Support the engine with a jack and remove the engine mount from the timing side. Remove the coolant expansion tank and the upper timing cover. Rotate the engine to top dead centre and lock the camshaft with an 8 mm pin and the flywheel with a special tool. Heat the crankshaft pulley bolt (for 4 minutes) before unscrewing it. Remove the pulley and the harmonic balancer (be careful not to damage it). Find the CONTITECH CT1140WP2 timing belt + pump kit on autoparti.it with code CT1140WP2 at a price of £162.98, including delivery charges. Replace the water pump (7 bolts of 11 mm), the tensioners, and the idler pulley. Clean the surfaces and install the new belt. Tension it with the Allen key, checking the tension indicator. Reassemble everything, reconnect the components, and fill the cooling system. Verify the timing by rotating the engine by hand and start it.
Posted on 17 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford Mondeo / Fusion
(2014-2021 /
MK 4)
Today, we will go through the steps to remove and replace the timing belt on a Ford Mondeo 2.0 TDCi. First, open the vehicle's bonnet and begin remov…
Ford Mondeo / Fusion
(2007-2014 /
MK 3)
Today's steps will show you the procedure for removing and replacing the timing belt on the Ford Mondeo. First, raise the vehicle and begin by removi…
Ford Mondeo / Fusion
(2014-2021 /
MK 4)
Today's main instructions will allow us to remove and replace the timing belt on the Ford Mondeo 2.0 TDCi. First, lift the vehicle and begin by disco…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.190
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |