Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCI

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Timing belt

Today's steps will show you the procedure for removing and replacing the timing belt on the Ford Mondeo. First, raise the vehicle and begin by removing the front right wheel and the wheel arch liner; then disconnect the auxiliary belt and remove the crankshaft pulley. At this point, remove the side timing cover and proceed with the timing belt removal, checking the wear condition of the other timing components; then install and refit the new timing belt, ensuring the engine is timed correctly.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's guide will show us the information regarding the disassembly and replacement of the timing belt of the Ford Mondeo 2.0 TDCI; the manufacturer…
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCi
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Today's main instructions will allow us to remove and replace the timing belt on the Ford Mondeo 2.0 TDCi. First, lift the vehicle and begin by disco…
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Guide to replacing the timing belt of the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's instructions will show us the process of disassembling and replacing the timing belt of the Ford Mondeo 2.0 TDCI. First, we open the hood of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos