Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the Ford Focus 4 remote control?

Model: Ford Focus MK 4 - Years 2018-2025
Part: Key

In the video guide presented here, we can see the key mentioned above, which needs a battery change inside because it is running low. Understanding that the battery is no longer suitable is easy, in fact the central locking and unlocking of the vehicle does not occur, so let's proceed to perform the change as follows: Get a small flathead screwdriver and gently pry open the shell of the remote control. The work is almost done, we just need to remove the old battery, install the new one, and close the aforementioned shell.

Posted on 27 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery of a Ford Focus
How to Replace the Key Fob Battery of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you replace the key fob battery of a Ford Focus? Follow these steps. Take your key fob and use a screwdriver to pry around the cover cap (remo…
How to Replace the Remote Battery of the Ford Focus?
How to Replace the Remote Battery of the Ford Focus?
Ford Focus (2011-2018 / MK 3) When the remote for your Ford Focus stops working, the cause is almost always a flat battery. To replace the remote battery of a Ford Focus, you must…
How to replace the remote battery of the Ford Focus
How to replace the remote battery of the Ford Focus
Ford Focus (2018-2025 / MK 4) In this video, see how to extract the emergency blade and replace the battery of the fourth series Ford Focus remote. To extract the blade, press the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos