Do it yourself
Frequently asked questions about cars and motorcycles

How to restore the Start & Stop feature in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

If the Start & Stop system of our Ford Focus has suddenly stopped working, it is very likely that the problem concerns the battery and that the related management system needs to be reset. This is a very simple and quick operation, let's see how to proceed in this tutorial. First of all, let's go inside the car, then insert the key and press the start button once. Next, press the rear fog lights activation button five times in a row, press the emergency lights button three times, and restart the vehicle. At this point, all that's left to do is to verify that the procedure was successful.

Posted on 5 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2011-2018 / MK 3) To activate the Start&Stop on a Ford Focus, turn on the instrument panel and use the button located on the centre console next to the gear lever. Pre…
Ford Focus (2011-2018 / MK 3) In order to deactivate the Start&Stop system of the Ford Focus, you need to insert the ignition key into the ignition switch, so that you can turn on…
Ford Focus (2011-2018 / MK 3) In today's tutorial, you will learn how to reset and restore the Start&Stop function on the Ford Focus by following these simple and quick steps. Fir…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos