Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Seal on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Checks and maintenance

How to fit the perimeter seal on the rear door of a Ford Fiesta? Don't worry, follow these steps: take the rubber seal and with your hand follow the perimeter of the frame, press and move along the door's track. Press the door seal firmly with your hands to ensure it adheres properly. Finally, check by running your hand over the seal, press and smooth out any areas that are not properly seated around the perimeter. Test the door closure to ensure it shuts correctly.

Updated on 7 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Antenna on a Ford Fiesta
How to Replace the Antenna on a Ford Fiesta
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) Before you can begin, exit the cabin of your Ford Fiesta and head to the antenna. Start by unscrewing the antenna from its housing. By doing this, yo…
How to Remove the Gear Knob from a Ford Fiesta
How to Remove the Gear Knob from a Ford Fiesta
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) Before starting, sit in the driver's seat of your Ford Fiesta. Begin by gripping the gear knob with both hands. Next, unscrew it from the gear lever.…
What is the fuse layout of the Ford Fiesta?
What is the fuse layout of the Ford Fiesta?
Ford Fiesta (2017-2023 / Fiesta 7, MK VII, MK 7) In this video we can see where the fuse boxes of the Ford Fiesta are located and what their respective diagrams are, useful in case we want to check …

    Frequently Asked Questions

    • Fiesta 2017-2023 - What caused the oil change problem on the Ford Fiesta? Read answer
    • Fiesta 2008-2017 - Where is the Ford Fiesta 1.4 TDCi diesel pressure sensor located? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Reset the TPMS Light on the 2011 Volkswagen Polo

The orange tyre light indicates that one or more tyres have a pressure below the recommended limit. This can easily be resolved by inflating them correctly or replacing them in case of a puncture. After performing these actions, it is necessary to reset the light and the sensor to obtain new reading data. All you need to do is start the ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point, the reset is complete, and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos