Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cylinder Head Gasket on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Cylinder head

Today's main steps will show you how to remove and replace the cylinder head gasket on a Ford Fiesta. First, open the bonnet of the vehicle and start removing all the pipes and various connections found on the top of the engine, disconnecting the various clips; then unscrew the bolts of the cylinder head cover, as illustrated in the video. At this point, remove the coolant reservoir and the engine mount, then subsequently remove the timing belt; then remove the cylinder head and replace its gasket!

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Door Seal on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to fit the perimeter seal on the rear door of a Ford Fiesta? Don't worry, follow these steps: take the rubber seal and with your hand follow the …
How to Remove the Driveshaft on a Ford Fiesta
How to Remove the Driveshaft on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replace the damaged CV joint on the Ford Fiesta. Lift the vehicle to a comfortable height for working. Remove the wheel bolts using a socket or air i…
How to Replace the Valve Cover Gasket on the Ford Fiesta?
How to Replace the Valve Cover Gasket on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the valve cover gasket, open the bonnet to access the engine bay and loosen all the screws securing the valve cover. Once the screws are l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos