Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Ford Puma key.

Model: Ford Puma MK 1 - Years 2019-2026
Part: Key

In today's video, we will see the entire operation necessary to replace the battery of a Ford Puma key, a model in production since 2019. So let's start the procedure by pressing the release button of the physical key to extract it from its housing. Next, using a small flathead screwdriver, we will remove the back cover of the key as shown in the video. Once this is done, we can take out the old battery from its slot and replace it with a new one. Finally, we reassemble everything by following the reverse procedure. The required battery is the CR2032, 3V.

Posted on 2 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you change the battery of the key for the Ford Puma 2020?
Ford Puma (2019-2026 / MK 1) Very short video tutorial attached here to fully understand how to replace, in less than a minute, the battery of the key/remote of the Ford Puma and…
How to replace the battery of the Ford Puma 2022 remote control
How to replace the battery of the Ford Puma 2022 remote control
Ford Puma (2019-2026 / MK 1) In this new guide you will find the description of all the steps you need to follow to correctly replace the battery inside the remote control of you…
How to Replace the Remote Battery of the Ford Puma?
How to Replace the Remote Battery of the Ford Puma?
Ford Puma (2019-2026 / MK 1) As shown in this tutorial, replacing the remote battery of the Ford Puma is an extremely simple and quick operation. To do this, you will need a smal…

Other guides you may be interested in

How to Reset the Brake Pad Warning Light on a Mini

If the brake pad wear warning light illuminates on the dashboard of your vehicle, after replacing the brake pads, you will need to reset the warning light. This guide provides simple instructions on how to perform the reset. First, access the cabin and turn on the ignition. On the lower part of the dashboard, there is a button that you need to press and hold until the brake pad replacement indicator starts to flash and you are prompted to confirm the reset. Release the button and press it again for one second to confirm the cancellation.

Watch the video!


by ScegliAuto

More videos