Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Service warning light

You can completely clear the Service light displayed on the instrument cluster of the Ford Kuga by turning on the ignition and waiting for all messages indicating the resets to be performed to appear on the display. Once the messages have finished, proceed with the reset of the light: press the brake and accelerator pedals fully three times and then hold them down. A message will appear on the display indicating that the oil reset is in progress. After a few seconds, the light will reset, and you can verify this by turning the ignition off and back on.

Posted on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Ford Kuga?
How to Reset the Service Light on the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To reset the Service light on the Ford Kuga, turn on the ignition and simultaneously press the brake and accelerator pedals for about fifteen seconds…
How to Reset the Service Light on a Ford Kuga?
How to Reset the Service Light on a Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) Note that this video guide refers to the Ford Kuga produced from 2008 to 2012. The purpose of this tutorial is to show the guided procedure for reset…
How to Reset the Tyre Pressure Light of the Ford Kuga?
How to Reset the Tyre Pressure Light of the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) To completely clear the Service light displayed on the instrument panel of the Ford Kuga, you will need to turn on the instrument panel by inserting …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos