Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filler Flap on a Ford Transit Van

Model: Ford Transit MK 8 - Years 2014-2024
Part: Fuel cap

In this tutorial, we will see how to replace the fuel filler flap on a Ford Transit van, an extremely simple and quick operation. First, open both the driver's door and the flap itself, then unscrew the indicated screw with a Torx T25 key, unclip the lower cover, and continue by unscrewing the two screws just freed. Next, detach the entire plastic support from the bodywork, removing the lower base if necessary, position the replacement part, and reassemble everything by simply following the reverse procedure.

Posted on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter in the Ford Transit Connect van?
How to replace the fuel filter in the Ford Transit Connect van?
Ford Transit (2014-2024 / MK 8) In this tutorial we can see how to replace the fuel filter in the Ford Transit Connect van, an extremely simple and quick operation. First of all, ma…
How to reset the AdBlue warning light in the Ford Transit van?
How to reset the AdBlue warning light in the Ford Transit van?
Ford Transit (2014-2024 / MK 8) If the AdBlue warning light has illuminated in your Ford Transit van, it means that the emissions fluid has reached a too low level and therefore nee…
How to reset the AdBlue warning light in the Ford Transit van?
How to reset the AdBlue warning light in the Ford Transit van?
Ford Transit (2014-2024 / MK 8) If the AdBlue warning light in our Ford Transit van's instrument panel has turned on, it means that the pollution control system's liquid has reached…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos