Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Ford Ecosport Key

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

Replacing the battery in the Ford Ecosport key is a fairly simple task that can be done in a few minutes. To start, on the side of the key near the attachment ring, you will see a small recessed button that needs to be pressed to open the cover with the Ford emblem that houses the physical key. Once the cover is opened, you will have access to the physical key, which should be removed, and you will notice a small hole corresponding to the attachment ring.

At this point, you will need a small flathead screwdriver to gently pry inside the hole and along the side joint of the cover. Once done, the cover will open in two, and inside you will find the electronic board on one side and the battery compartment on the other.

Now, after replacing the old battery with a new one, you can close the cover and reinsert the physical key with the cover in place.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

Replacing the Key Battery on Ford Ecosport
Replacing the Key Battery on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Let’s replace the battery in the key of a Ford Ecosport. To replace the battery, you need to disassemble the plastic parts of the key. Use a screwdri…
How to Replace the Battery in a Ford Ecosport Key Fob
How to Replace the Battery in a Ford Ecosport Key Fob
Ford Ecosport (2012-2023 / BK, MK 1) Learn how to replace the battery in the key fob of a Ford Ecosport: Take your key fob and use a small screwdriver to pry between the two covers of th…
How to Replace the Key Fob Battery for the Ford Ecosport
How to Replace the Key Fob Battery for the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) The following instructions will show you how to disassemble and replace the battery in the key fob for the Ford Ecosport. First, take your key fob an…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos