Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlamp on a Ford Fiesta MK IV

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Headlight

See other generations:
Video tutorial

Let's see how to replace the front headlamp on a Ford Fiesta MK4. First, remove the central grille (the one between the two headlamps), which is held in place by plastic clips, so it should come off easily. There are three screws holding the headlamp: one at the top/inside and two at the bottom (after removing the grille, they are clearly visible).

Remove the screws and keep them aside for reassembly. Lift the headlamp and pull it towards you: behind it, there is a plastic connector that needs to be released and the electrical connector that needs to be disconnected.

You can find the replacement headlamp on tarostrade, it under the EAN code 3800957036582 (right) at the price of £37.64 + £7.70 for shipping. Install the new headlamp by inserting the plastic pin into the guide hole, reconnect the connector, and screw the three screws back in. Adjust the height of the headlamp with the two adjustment knobs and reassemble the grille.


Posted on 10 April 2026 by ScegliAuto


Related tutorials

Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) These brief and simple steps will allow you to remove and replace the rear light on a Ford Fiesta. First, open the boot and start removing the side t…
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Below is the guide that will allow you to remove and replace the front fog light bulb of the Ford Fiesta. First, move to the front of the vehicle and…
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the front headlight on the Ford Fiesta, open the bonnet and loosen the screws located at the top of the headlight on its supports. Once th…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos