Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Dynamic Indicators and Courtesy Lights on a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Side mirror

See other generations:
Video tutorial

In this video, you will see how to install dynamic indicators and courtesy lights on the Ford Focus MK2 facelift: start by removing the wing mirror and inserting a plastic lever between the mirror and the cover: pull firmly forward and disconnect the two wires for the demisting.

Remove the front cover and detach the courtesy light by pressing the clip on the left.

Remove the indicator by pushing it outwards and disconnect both connectors. Clean the inside of the cover thoroughly.

Dynamic indicators come in various styles: you can purchase them with the code 257059247115 on E-bay for £18.82, with free delivery. Connect the LED lights to the connectors, perform a functionality test, and refit in reverse order, then reconnect the demisting wires.

Repeat the same procedure for the other wing mirror. This operation takes just under an hour.


Posted on 12 April 2026 by ScegliAuto


Related tutorials

How to Fit Dynamic Indicators on a Ford Focus MK4
How to Fit Dynamic Indicators on a Ford Focus MK4
Ford Focus (2018-2025 / MK 4) Let's see how to fit dynamic indicators on the Ford Focus MK4. This accessory can be found on AliExpress using code 1005001517944989 for £9.20 plus £…
Where are the fuses located in the Ford Focus?
Where are the fuses located in the Ford Focus?
Ford Focus (1998-2004 / MK 1) The fuses in the Ford Focus are divided between two fuse boxes installed within the vehicle: the first is located inside the dashboard, at the bottom…
How to Replace the Rear Lights on a Ford Focus
How to Replace the Rear Lights on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will learn how to replace the bulbs of the rear lights on the second series of Ford's C segment, the Focus. Start by opening the b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos