Do it yourself
Frequently asked questions about cars and motorcycles

How to Fit Dynamic Indicators on a Ford Focus MK4

Model: Ford Focus MK 4 - Years 2018-2025
Part: Checks and maintenance

Let's see how to fit dynamic indicators on the Ford Focus MK4. This accessory can be found on AliExpress using code 1005001517944989 for £9.20 plus £7.00 for delivery. The installation is very simple. First, adjust the mirror so it is fully turned inwards. Then, use a lever to remove the mirror cover. Remove the small screw that holds the indicator to its support and lift it to disconnect the electrical plug. Replace the standard indicator with the dynamic one by reconnecting the plug and screwing the screw back in. Replace the cover and test the indicator. Proceed with the other side.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will see how to install dynamic indicators and courtesy lights on the Ford Focus MK2 facelift: start by removing the wing mirror a…
Ford Focus (2004-2011 / MK 2, Focus 2) How to replace the side indicator located in the external mirror of a Ford Focus? Proceed as follows: using a lever with a plastic or rubber coating,…
Ford Focus (2018-2025 / MK 4) Let’s see how to install a dash cam on a Ford Focus MK4: run the cable through the vehicle's A-pillars, then through the windscreen seal to the unshi…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos