Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Tailgate Panel on the Ford Fusion

Model: Ford Fusion MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

Video tutorial

The instructions in this guide will show you how to remove the rear tailgate panel of the Ford Fusion. First, open the boot lid and start unscrewing the fastening screws found on the side of the tailgate trim; pry up the sides to detach and remove it, as shown in the video.

At this point, you will be able to access the internal components of the tailgate, making the necessary repairs or replacements; finally, securely refit the internal trim onto the rear tailgate.


Posted on 25 April 2026 by ScegliAuto


Related tutorials

Replacing the Mirror and Cover on a Ford Fusion
Replacing the Mirror and Cover on a Ford Fusion
Ford Fusion (2002-2012 / MK 1) When it comes to the Ford Fusion, if you only need to replace the mirror glass, simply pull it from the outer side (at the same time, you might push …
Where is the Radio Fuse on a 2007 Ford Fusion?
Where is the Radio Fuse on a 2007 Ford Fusion?
Ford Fusion (2002-2012 / MK 1) The radio fuse on a 2007 Ford Fusion is located inside the fuse box in the cabin, specifically under the driver's side dashboard. The fuse is labelle…
How to remove the front door panel of the Ford Fusion
How to remove the front door panel of the Ford Fusion
Ford Fusion (2002-2012 / MK 1) To remove the front door panel of the Ford Fusion, we need to use a flathead screwdriver to remove the cover of the opening handle screw; using the s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos