Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mirror and Cover on a Ford Fusion

Model: Ford Fusion MK 1 - Years 2002-2012
Part: Side mirror

When it comes to the Ford Fusion, if you only need to replace the mirror glass, simply pull it from the outer side (at the same time, you might push in the inner side) and detach it from the internal clips. Similarly, to fit the new mirror, just push it into place using your hands. If, however, your task is more difficult and you need to replace the entire cover, follow the process in the video where the door panel is removed to access the connections for the cover itself. Good luck!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Conditioning Control Bulbs on a Ford Fusion
How to Replace the Air Conditioning Control Bulbs on a Ford Fusion
Ford Fusion (2002-2012 / MK 1) Start by removing the plastic cover around the radio by gently pulling from the bottom. Once the cover is removed, you will be able to extract the cl…
How to Replace the Remote Battery on a Ford Fusion?
How to Replace the Remote Battery on a Ford Fusion?
Ford Fusion (2002-2012 / MK 1) As shown in this tutorial, replacing the battery in the remote for a Ford Fusion is a very simple and quick operation. You will need a replacement ba…
How to remove the front door panel of the Ford Fusion
How to remove the front door panel of the Ford Fusion
Ford Fusion (2002-2012 / MK 1) To remove the front door panel of the Ford Fusion, we need to use a flathead screwdriver to remove the cover of the opening handle screw; using the s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos