Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Rear-View Mirror of a Ford Fusion

Model: Ford Fusion MK 1 - Years 2002-2012
Part: Side mirror

Before you start, open the front door of your Ford Fusion. Begin by unscrewing and removing the screws that secure the window switch to the door, then extract the switch from its housing and disconnect the electrical connector. Next, unscrew and remove the screws that secure the door panel, and finally, unclip the door panel itself. This will give you access to the nuts that secure the mirror to the door. Proceed by disconnecting the electrical connector of the rear-view mirror, then unscrew and remove the securing nuts. At this point, you can extract and remove the external rear-view mirror, completing the disassembly.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Horns on Ford Fusion
Replacing the Horns on Ford Fusion
Ford Fusion (2002-2012 / MK 1) On the Ford Fusion, the manufacturer has positioned the horns behind the windscreen washer reservoir and near (in front of) the front passenger wheel…
Fuse Diagram for the 2012 Ford Fusion
Fuse Diagram for the 2012 Ford Fusion
Ford Fusion (2002-2012 / MK 1) This video shows the correct location of the fuse boxes in the Ford Fusion. It also shows their assignment and rating, to identify the correct fuse a…
Where Are the Fuses in the Ford Fusion?
Ford Fusion (2002-2012 / MK 1) The fuses in the Ford Fusion are located inside the designated fuse boxes within the car. In this model, there are two boxes containing the fuses. Th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos