|
Do it yourself
| |||
| ||||
How to Fix the Engine Fault Error on the Ford Kuga MK1
Model: Ford Kuga
C394, MK 1
- Years:
2008, 2009, 2010, 2011, 2012
Video tutorial
A problem that typically occurs on the Ford Kuga MK1, but also on other Ford vehicles from this period, is the "engine fault" error with the diagnostic error P1900, where the main cause is a soldering defect on the rear connector of the instrument panel (speedometer) and not a true engine fault. The internal solder points, where the connector connects, micro-fracture or oxidise, causing intermittent connection, ghost errors, and warning lights that illuminate without a real mechanical issue; the solution is to dismantle the instrument panel (not shown in detail in the video) and then access the electronic board, where there are 4 metal dots; remove the metal plate and disconnect the display connector. On the back, there are all the solder pins. Clean them well with an electrical contact spray and a soft-bristled brush. If you are capable, redo all the soldering on the connector pins on the board side. The problem is visible: there is often dirt/mould/oxidation or micro-cracks; otherwise, take it to a mobile phone repairer or an electronics technician. Then reassemble the panel, clear the errors, and the engine light will not come back on.
Posted on 26 April 2026 by ScegliAuto
Related tutorials
Ford Kuga
(2012-2019 /
MK 2, C520)
If the dashboard of your Ford Kuga is creaking, follow these steps to remedy the issue: use a plastic spatula to remove the grille located on the top…
Ford Kuga
(2020-2026 /
MK 3)
To reset the tyre warning light on the Ford Kuga, first remove the fault, then proceed to reset the light. Start by turning on the instrument cluster…
Ford Kuga
(2012-2019 /
MK 2, C520)
If the service light on your Ford Kuga remains illuminated on the instrument panel even after servicing the vehicle, it indicates a minor error in th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Frequently Asked QuestionsHow to Remove the Spare Wheel from the Citroen C4 Picasso
Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |