Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Ford Kuga

Model: Ford Kuga MK 3 - Years 2020-2026
Part:

To reset the tyre warning light on the Ford Kuga, first remove the fault, then proceed to reset the light. Start by turning on the instrument cluster, then access the vehicle menu settings using the button on the left side of the steering wheel. Select "settings", then "driver assistance", and then choose "tyre monitoring". At this point, press the "ok" button until the initialisation is complete (you will see the progress bar moving under the operation). The display will indicate that the operation is complete.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor on the 2017 Ford Kuga
How to reset the tire pressure sensor on the 2017 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this new mini guide dedicated to your 2017 Ford Kuga, we will discover how to correctly perform the manual reset of the tire pressure warning ligh…
How to reset the tire pressure light on the Ford Kuga?
How to reset the tire pressure light on the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) In this tutorial we can see how to reset the tire pressure warning light in the Ford Kuga, an extremely simple and quick operation, to be done only a…
How to Replace the Timing Belt on a Ford Kuga?
How to Replace the Timing Belt on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) Hello, today you will replace the timing belt on your Ford Kuga. First, open the bonnet and remove the air filter assembly along with the engine cove…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to reset the tire warning light in Ford Kuga? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos