Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

This guide shows how to reset the tyre pressure warning light on the 2015 Ford Kuga. After checking the tyre pressure with a gauge and comparing it to the chart located on the door frame, proceed to the following operation. With the ignition on, press the left arrow on the steering wheel controls to enter the menu.

Navigate to the information tab and select the 'Driver Assist' section. Go to the tyre pressure option and press the 'OK' button to reset the light.

Turn off and then restart the ignition to check the reset.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure light in the Ford Kuga?
How to reset the tire pressure light in the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) In this tutorial we can see how to reset the tire pressure light in the Ford Kuga, a very simple and quick operation, to be done only once the correc…
How do you reset the tire pressure warning light on the Ford Kuga?
How do you reset the tire pressure warning light on the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) It will be possible to reset the tire pressure warning light of the Ford Kuga by inflating the tires to the recommended pressure value: this value wi…
How to reset the tire pressure sensor on the 2021 Ford Kuga
How to reset the tire pressure sensor on the 2021 Ford Kuga
Ford Kuga (2020-2026 / MK 3) If the tire pressure warning light on the display of your 2021 Ford Kuga continues to illuminate even in the absence of a puncture or actual pressure…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos