Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Ford Turneo

Model: Ford Tourneo MK 2 - Years 2013-2024
Part: Service warning light

Before starting the reset procedure for the service light on the Ford Turneo, ensure that all doors, including the boot, are completely closed. Begin by turning on the instrument panel, leaving the engine off, and simultaneously press the brake and accelerator pedals. Hold them down for at least twenty seconds until a message appears on the display indicating that the service reset has been completed. At this point, you can release the pedals and turn off the instrument panel.

Posted on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fold Down the Rear Seat of a Ford Tourneo Custom
How to Fold Down the Rear Seat of a Ford Tourneo Custom
Ford Tourneo (2013-2024 / MK 2) Before you begin, exit the cabin of your Ford Tourneo Custom and head to the right side of the vehicle. Start by opening the sliding side door by pul…
How to Replace the Oil Filter and Engine Oil on the Ford Tourneo
How to Replace the Oil Filter and Engine Oil on the Ford Tourneo
Ford Tourneo (2013-2024 / MK 2) Lift the front of the Ford Tourneo 2.0 to perform the oil filter and engine oil replacement. Unscrew the nut on the oil sump to drain the used oil in…
How to reset the service light on a Ford Tourneo or Transit
How to reset the service light on a Ford Tourneo or Transit
Ford Tourneo (2013-2024 / MK 2) Let's see how to reset the service light on a Ford Tourneo or Transit with a manual transmission. With the vehicle off, press the brake and accelerat…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos