Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How the Tire Pressure Monitoring System Works on the Ford Bronco

Model: Ford Bronco U725 - Years 2021-2026
Part: Onboard computer

Let's see how the tire pressure monitoring system works on the Ford Bronco: to view the pressure, press the "menu" button on the steering wheel, then select "off road" and then "tire pressure": on the instrument display, you will see the pressure in PSI (pounds per square inch: 1 PSI=0.6894 bar). Each wheel is equipped with a wireless sensor that monitors the pressure, and the system starts transmitting at speeds above 20 mph. If the pressure is too low, a warning light will illuminate, and a message will appear indicating exactly which tire has the issue.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the New Ford Bronco
How to Replace the Cabin Air Filter in the New Ford Bronco
Ford Bronco (2021-2026 / U725) In this guide for your new Ford Bronco, you will find all the steps necessary to replace the cabin air filter. Fortunately, the entire operation is q…
Where is the fuse box of the Ford Bronco located?
Where is the fuse box of the Ford Bronco located?
Ford Bronco (2021-2026 / U725) If you own the new Ford Bronco and want to find out where the fuse box containing all the car's fuses is located, all you have to do is pay attention…
Where to Find the Cabin Fuses of the Ford Bronco
Where to Find the Cabin Fuses of the Ford Bronco
Ford Bronco (2021-2026 / U725) If you don't know where the box containing all the cabin fuses of your new Ford Bronco is located, don't worry because you just need to follow the st…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos