Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Manufacturer's Badge on the Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Manufacturer emblem

See other generations:
Video tutorial

This guide provides instructions for removing and replacing the manufacturer's badge on the Ford C-Max. First, position yourself in front of the logo or badge, then heat the area to ensure the adhesive comes off easily; pry at the sides to remove the manufacturer's badge without damaging the bodywork, as shown in the video.

At this point, clean the area of the badge from dirt and old adhesive, then install and securely fix the new logo onto the bodywork.


Posted on 25 June 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of the Ford C-Max?
How to Open the Bonnet of the Ford C-Max?
Ford C Max (2003-2010 / MK 1) To open the bonnet of the Ford C-Max, move the manufacturer's emblem located at the front of the vehicle to access the corresponding lock. Turn the k…
How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…
Where is the OBD Port on the Ford C Max 2011?
Ford C Max (2010-2019 / MK 2) If you want to connect a diagnostic tool to your Ford C Max second generation (2011) but do not know where the OBD port is located, do not worry as t…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos