Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Wishbone on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Control arm

Learn how to change the wishbone on a Ford Fiesta. Lift the car using a column lift and loosen the wheel nuts with a telescopic spanner. Use a socket wrench to remove the lower securing bolt of the wishbone and the bolt mounted under the wheel hub, then remove the bolts from the upper arm (as shown in the video). Use a pry bar to detach the wishbone from the bolt seats. Always compare the old parts with the new ones; if they are suitable, you can install them. Insert the wishbone into both ends of the guides and begin tightening all the bolts onto the threads (attach the wishbone to the wheel hub and the other end to the chassis). Double-check that everything is securely tightened.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front wheel bearing on a Ford Fiesta?
How to replace the front wheel bearing on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the front wheel bearing on a Ford Fiesta, lift the car so that the corresponding wheel is off the ground. Remove the wheel by loosening th…
How to Change the External Mirror on a Ford Fiesta
How to Change the External Mirror on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to change the external rear-view mirror on a Ford Fiesta? Follow these steps. Use a plastic lever to pry between the edge of the mirror frame and…
How to Replace the Spark Plugs in a Ford Fiesta?
How to Replace the Spark Plugs in a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the spark plugs in a Ford Fiesta, open the bonnet to locate the coils at the top of the engine block, just below the windscreen. Remove th…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos