|
Do it yourself
| |||
| ||||
How to Replace Tail Lights and Bulbs on a Ford F150
Model: Ford F-150
- Years:
2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
To perform this operation, first lower the tailgate to improve access. You will find two visible screws on the side of the tail light; remove them to create a small gap. Now pull the tail light towards you, between the tail light and the body. Be careful: there are two plastic pins holding the tail light, and the upper one tends to pull the plastic bushing off, which we must not lose. Behind the tail light, press the gray tab on the top of the connector and disconnect it. On the back of the tail light, you will find the bulb sockets: two for the brake/rear lights and one center for the reverse light. The bulb sockets rotate counterclockwise; pull the bulb from the base, not from the glass. Insert the new bulb (do not touch the glass of this one), put the bulb back into the tail light, and rotate it clockwise until it locks. Replace the plastic bushing in its place, reconnect the electrical connector, align the two plastic pins, push the tail light towards the body, and tighten the two screws. Done.
Posted on 17 November 2026 by ScegliAuto
Related tutorials
Ford F-150
(2015-2020 /
MK 13)
This guide shows how to remove the front bumper of the Ford F150 Mk13. After securing the vehicle, disconnect the negative battery terminal. Remove t…
Ford F-150
(2015-2020 /
MK 13)
In today's short and simple video guide, see how to replace the front fog light bulb on a Ford F150 of the thirteenth generation, produced from 2015 …
Ford F-150
(2009-2014 /
MK 12)
In this video, see how to replace the fog light bulb on a Ford F150: access it easily from the front wheel well, which you need to remove for easy ac…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Change the Key Fob Battery for an Audi Q8?
To change the key fob battery for an Audi Q8, start by locating the release button on the key. Press this button to extract the emergency mechanical key. With the mechanical key removed, find the visible slot in the key body. Use a small flathead screwdriver or a plastic tool to gently pry open the key fob shell. Once the shell is open, you will find the battery, usually a CR2032. Note the orientation of the battery before removing it. Remove the old battery and insert the new one, ensuring the positive (+) side is oriented correctly. Reassemble the key fob shell, making sure all pieces fit together snugly. Finally, reinsert the mechanical key into its housing. Your key should now function properly with the new battery. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.104
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |