Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a 2019 Transit Custom

Model: Ford Transit - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

Here’s how to reset the service light on a 2019 Ford Transit Custom: insert the key into the ignition and turn it to position II to illuminate all warning lights. The display shows "oil change required". Use the buttons on the steering wheel to navigate the menu and from the main menu, find the "Service" option.

In the submenu, locate "oil status". Press and hold the "ok" button on the steering wheel for a few seconds until the confirmation appears: "reset". Exit the menu and turn off the ignition by removing the key. Wait a moment, then turn it back on to check that the message has disappeared.


Posted on 20 November 2026 by ScegliAuto


Related tutorials

Ford Transit (2012-2024 / Custom) To reset the service light on the Ford Transit Custom, get in the vehicle and turn on the ignition without starting the engine. Fully press the accel…
Ford Transit (2012-2024 / Custom) The Service indicator that is shown on the instrument panel of the Ford Transit Custom can be reset by holding down the accelerator and brake pedals …
Ford Transit (2012-2024 / Custom) After changing the motor oil, we will reset the service light; let's see the reset procedure for the Ford Transit Custom. First, we get into the car …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos