Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Ford Transit Custom

Model: Ford Transit Custom - Years 2012-2024
Part: Service warning light

After changing the motor oil, we will reset the service light; let's see the reset procedure for the Ford Transit Custom. First, we get into the car and start pressing and holding down the brake pedal and the accelerator pedal; then we turn on the instrument panel, waiting for about ten seconds until the service warning reset is complete (we will see the confirmation on the instrument panel display), as shown in the video. At this point, we turn off the instrument panel and finally start the engine!

Posted on 3 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Warning on a Ford Transit Custom
Resetting the Service Warning on a Ford Transit Custom
Ford Transit (2012-2024 / Custom) The instructions in this guide will illustrate the procedure to reset the service light on a Ford Transit Custom. First, get inside the vehicle and t…
Resetting the Service Light on a Ford Transit Custom
Resetting the Service Light on a Ford Transit Custom
Ford Transit (2014-2024 / MK 8) Resetting the Service light on a Ford Transit Custom is a very simple and quick operation. First, press and hold both the brake pedal and the acceler…
How to Reset the Service Light on the Ford Transit Custom
How to Reset the Service Light on the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Below are the instructions on how to correctly reset the service light on your Ford Transit Custom. The steps are quite simple and quick as follows. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos