Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light of a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light

This guide covers the removal of the rear light of a Ford Fiesta. It's a simple task; open the boot lid, and using a screwdriver, unscrew the securing screws located at the side of the rear light. Once the rear light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs in the bulb holders (with identical size and voltage parts). Finally, refit the new light and reverse the assembly steps with all parts.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Ford Fiesta
How to Remove the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Learn how to remove the rear light of a Ford Fiesta. In this video, see how to dismantle the reflector light. Open the compartment under the light, s…
How to Remove the Third Brake Light on Ford Fiesta
How to Remove the Third Brake Light on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Let’s look at removing the third brake light of a Ford Fiesta. Lift the tailgate to access the back and start dismantling the light. Disconnect the c…
Disassembly of the rear light of a Ford Fiesta
Disassembly of the rear light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Through this very short video tutorial today, you will be able to see the entire necessary procedure step by step to disassemble the rear light of a …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos