Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Bumper on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Front bumper

In this video, learn how to remove the front bumper of a Ford Fiesta. Lift the bonnet and secure it. Use a plastic lever to remove the rivets (screws) located at the top of the bumper. Once the top rivets are removed, unscrew the rivets from the wheel arch liners and finally remove the pins located at the bottom of the bumper. Disconnect the bumper from the body of the vehicle. To proceed with the installation: hold the bumper against the body of the vehicle and tighten all screws/rivets around the wheel arch liners and along the perimeter.

Updated on 14 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Bumper from the Ford Fiesta
Removing the Bumper from the Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How to remove the front bumper from the Ford Fiesta? Begin by lifting the front bonnet and unscrewing the screws from the front grille: remove it fro…
How to Remove the Rear Bumper of a Ford Fiesta
How to Remove the Rear Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the boot of your Ford Fiesta. Begin by unscrewing and removing the fastening bolts located in the rear wheel arches. Next,…
Removing the Front Bumper from the Ford Fiesta
Removing the Front Bumper from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this brief and simple guide, learn how to remove and replace the front bumper of the Ford Fiesta by following the instructions below. First, open …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos